Main Features & Product Highlights
-
Schuko Plug → CEE Red 5-Pin Socket Adapter Cable
This extension cable enables you to connect your CEE Red 5-pin power male plug to a standard Schuko socket. In effect, you can plug your industrial / EV equipment into a household or Schuko outlet via this adapter. -
Power Conversion: 3-Phase → Single-Phase
When you use this adapter cable, the charging capacity will be reduced from 3-phase, 16 A, 11 kW down to 1-phase, 16 A, 3.5 kW.
This means the adapter supports safe operation under standard Schuko provisions, though at reduced power.
Technical Specifications
| Parameter | Value |
|---|---|
| Input Plug | CEE Red, 5 pins (3 phases + Neutral + Earth) |
| Output Plug | Schuko (standard household socket) |
| Maximum Input | 3-phase, 16 A, up to 11 kW |
| Maximum Output (via adapter) | 1-phase, 16 A, ~3.5 kW |
| Conversion Type | From 3-phase supply to single phase output |
| Cable / Connector Type | Durable industrial grade, suitable for reliable connections |
| Use Case | EV portable charger, industrial to household power bridging, flexible on-site charging |
Use Cases & Benefits
-
Flexibility for EV Charging
If your EV charger or equipment is built for CEE Red 5-pin input but your available socket is only Schuko, this adapter gives you compatibility (albeit at lower power), so you can still charge or operate. -
Simplified Power Access
For sites or locations with only single-phase / Schuko power available, this adapter lets you tap into that infrastructure without rewiring or installing a full 3-phase supply. -
Cost-Effective Solution
Rather than investing in new infrastructure or specialized sockets, you can use this adapter as a practical, low-cost bridge between industrial plugs and consumer sockets.
Testing & Usage Recommendations
-
Load Testing
Under full load (16 A single-phase), monitor voltage stability, current draw, and thermal behavior. Ensure that the cable, plug bodies, and contacts remain cool and stable during prolonged use. -
Insulation & Safety Check
Because the adapter changes phase count, ensure the insulation, neutral/earth connections, and safety clearances are verified. Use proper protective devices and fuses as needed. -
Compatibility Check
Confirm your connected devices are tolerant of single-phase supply at reduced power. Some 3-phase equipment may not operate properly under 1-phase power, so this adapter is best for devices (like portable EV chargers) that support single-phase modes. -
Mechanical Durability
Test repeated plug/unplug cycles to ensure no loosening or contact degradation. Industrial plugs/cables should maintain reliability over many cycles. -
Labeling & Instruction
Clearly mark the adapter’s conversion effect (3-phase → 1-phase, power reduction) so users are aware of limitations and avoid mismatches.
