Full Model Lineup: 7kW / 11kW / 22kW
The smart charging station is available in three power configurations to match your vehicle and home electrical setup — all featuring adjustable current, IP65 weatherproofing, and a clear 4.3-inch LCD display.
- 7kW Single-Phase (32A): Ideal for standard home installations; current adjustable at 8A / 10A / 13A / 16A / 20A / 25A / 32A.
- 11kW Three-Phase (16A): A balanced three-phase option — current adjustable at 8A / 10A / 13A / 16A per phase.
- 22kW Three-Phase (32A): Maximum output for rapid home or commercial charging; current adjustable 8A–32A per phase.
- All models feature a 4.3-inch colour screen showing real-time Voltage, Current, and Charging Time.
- IP65-rated enclosures ensure reliable performance both indoors and in exposed outdoor environments.
Dynamic Load Balancing (DLB): Never Overload Your Home
A CT sensor installed on the household's main circuit measures real-time total current data and transmits it to the Wallbox, which then intelligently adjusts or stops charging based on your home's actual energy consumption.
- Works on both single-phase and three-phase home electrical systems without additional hardware.
- Available power ≥ 8A: The Wallbox adjusts charging current intelligently and charges normally.
- Available power < 8A: Charging pauses automatically to protect your home circuit.
- Prevents nuisance tripping caused by simultaneous EV charging and heavy appliance use (ovens, air conditioners, dryers).
- Optimises energy use so maximum available grid capacity always goes to your EV without exceeding safe limits.
Single-Phase DLB Scenarios: Intelligent Power Adjustment
See how the DLB system responds intelligently across different household usage scenarios, ensuring your EV always gets the maximum safe charge rate available.
- Low household load: Full available current is allocated to EV charging, maximising charging speed during low-demand periods such as overnight.
- High household load: The charger automatically steps down its draw to keep total consumption within the safe rated limit.
- Load spike: When a large appliance switches on suddenly, the charger responds within seconds to reduce output and prevent tripping.
- Load recovery: As household appliances switch off, the charger ramps back up to reclaim available capacity — without interrupting the session.
Three-Phase DLB: Real-Time Per-Phase Power Management
The on-screen DLB interface gives a live view of per-phase load distribution, helping users and installers verify that power is being managed correctly across all three phases.
- Displays real-time current values on each of the three phases (L1, L2, L3) simultaneously.
- Shows the charger's active output current alongside measured household consumption for full transparency.
- Visual indicators make it immediately clear when load balancing is actively reducing or increasing charging current.
- RS485 communication protocol connects the CT sensor to the charger for reliable, low-latency data transfer.
- Particularly useful for three-phase installations where load imbalance between phases could affect overall system performance.
Easy Installation: CT Sensor & RS485 Wiring Guide
Clear wiring diagrams are provided for both single-phase and three-phase DLB setups, making installation straightforward for qualified electricians.
- The CT clamp sensor installs around the incoming supply cable — no cutting or splicing of live wires required.
- RS485 data cable connects the CT sensor to the dedicated DLB input terminal on the charger.
- Separate wiring diagrams cover single-phase (L + N + PE) and three-phase (L1 + L2 + L3 + N + PE) configurations.
- All terminals are clearly labelled on the charger's internal connection block for error-free installation.
4.3-Inch Smart LCD: Full Charging Data at a Glance
Designed with a large 4.3-inch screen that monitors all conditions during the charging process — including Voltage, Current, and Charging Time — without needing to open the app.
- Displays live charging current (A), supply voltage (V), and instantaneous charging power (kW) simultaneously.
- Session energy counter (kWh) shows the total energy delivered in the current charging session.
- Status icons indicate charger state: standby, charging, scheduled, fault, and Wi-Fi / Bluetooth connectivity.
- High-brightness panel ensures readability in bright outdoor conditions without washing out in direct sunlight.
- Time and date can be synchronised via Zone Time under Wi-Fi, or set manually without a Wi-Fi environment.
Intelligent Log Management: 500 Charging + 100 Fault Records
Complete historical records are stored on-device so you can review past sessions or diagnose issues quickly — no cloud subscription required.
- Charging Log: Stores up to 500 recent entries covering charging duration, power consumption, and date.
- Fault Log: Records the last 100 faults including charging time and error codes to help pinpoint problems fast.
- Money-saving mode lets you schedule charging during off-peak hours directly from the device or app.
- All log data is also accessible and exportable through the Tuya Smart App for 12-month trend analysis.
Flexible Current Adjustment: 8A to 32A
Select the exact current level to match your home's available capacity or your vehicle's preferred charge rate — giving you full control over speed and cost.
- 7kW & 22kW versions: 8A / 10A / 13A / 16A / 20A / 25A / 32A adjustable.
- 11kW version: 8A / 10A / 13A / 16A adjustable to suit three-phase grid limits.
- Compatible with all electric vehicles featuring a Type 2 charging port.
- Current can be adjusted in seconds from the front panel, the LCD menu, or remotely via the Tuya / Smart Life app.
8 Intelligent Safety Protections: Type B Leakage & Beyond
Safety is built into every layer of this charger, from the housing to the internal electronics, meeting the most stringent international standards for home EV charging.
- Type B Leakage Protection (AC 30mA + DC 6mA): Detects both AC and DC residual currents — the highest level of personal protection required for EV chargers.
- Lightning-proof surge protection guards the charger and vehicle electronics against voltage spikes.
- Overvoltage and under-voltage protection disconnects charging if supply falls outside safe limits.
- Overcurrent protection prevents damage to wiring and components if current exceeds rated capacity.
- IP65-rated waterproof enclosure and UL94 V-0 flame-retardant housing provide robust physical protection indoors and outdoors.
- Earth (ground) fault detection and LED charge status indicators ensure a safe, visible connection every session.
RFID Card Function: Secure Access & Plug-and-Play Mode
The RFID system gives you flexible control over who can use the charger — ideal for shared driveways, rental properties, or multi-user commercial settings.
- RFID cards included and pre-paired; charging only begins after a registered card is presented — prevents unauthorised use.
- Plug-and-Play mode: Charging starts automatically when the connector is plugged in — ideal for private single-user installations.
- Switching between modes takes just a few button presses on the control panel — no app or tools needed.
- Additional RFID cards can be registered for families or shared spaces with multiple authorised users.
Smart App Control via Tuya: Full Remote Management
The free Tuya Smart / Smart Life App (iOS & Android) gives you complete control over your charger from anywhere — turning your smartphone into a powerful charging management centre.
- Start, stop, or pause charging sessions remotely at any time from anywhere with an internet connection.
- Monitor real-time charging current, voltage, and power output directly from the app home screen.
- View detailed charging history and energy consumption records for the past 12 months with visual data charts.
- Set up recurring weekly charging schedules to automatically charge during off-peak tariff hours and save on electricity bills.
- Receive push notifications for charging start, completion, and any fault alerts.
Weekly Charging Planner & Remote App Interface
Bluetooth Control: Smart Access Without Wi-Fi
The charger maintains full app functionality even in locations without a Wi-Fi signal — ideal for underground car parks, remote garages, or areas with poor network coverage.
- Direct Bluetooth connection between your smartphone and charger works within a 10-metre range — no router required.
- All core functions remain accessible via Bluetooth: start/stop, adjust current, monitor real-time status.
- For first-time setup without Wi-Fi, pair using your phone's personal hotspot — a mobile data signal is sufficient.
- Once paired, the charger remembers your device for seamless automatic reconnection on future visits.
Money-Saving Mode: Schedule Charging at Off-Peak Rates
Programme the charger once and let it automatically charge at the cheapest times, every day of the week — no manual intervention needed.
- Set a weekly charging timetable from the app, specifying different start and stop times for each day.
- Programme the charger to pause during expensive peak-rate periods and resume when rates drop overnight.
- Delay charging start by 1 to 15 hours after plugging in, giving full flexibility to exploit time-of-use tariffs.
- Set a maximum charging duration (1 to 15 hours) to avoid over-charging and reduce unnecessary energy draw.
- All schedules sync automatically to the charger over Wi-Fi — no need to be near the unit once configured.
Fast & Simple to Use: 3-Step Charging Process
Getting started is quick whether you choose RFID card, app control, or direct plug-in — the charger guides you through every step on its LCD screen.
- Step 1: Adjust current setting and verify total safety current on the Wallbox based on your home's input capacity.
- Step 2: Connect the Type 2 cable to your vehicle's charge port.
- Step 3: Start charging via RFID card tap, the Tuya App, or automatically via plug-and-play mode.
- LED charge status indicators on the control box help you identify the charger's working condition at a glance.
- Compatible with all electric vehicles featuring a Type 2 charging port, including Tesla, BMW, BYD, Volvo, and Volkswagen.
Premium Cable Materials: 99.95% Pure Copper & Silver-Plated Pins
Every material in the charging cable is selected to exceed industry-standard specifications for efficiency, safety, and durability.
- 99.95% pure copper conductor: Minimises resistive losses and heat generation — far above the purity of standard cables.
- 5µm silver-plated connector pins: Superior corrosion resistance and low contact resistance after thousands of mating cycles.
- TUV-certified TPU outer jacket: Flexible in cold temperatures, UV-resistant, and rated for outdoor use year-round.
- 5-metre standard length provides comfortable reach from most wall-mounted positions to vehicle charge port.
What's in the Box
Compatible with All Major EV Brands
About Feyree Technology
